As Penn Station Access ramps up on Amtrak's Hellgate Line between Sunnyside, Queens and New Rochelle Rochelle, it has started to put pressure on the Amber PRR Position Light signals that were installed in the 1980's to replace New Haven era semaphores. Some research indicated that some of the once nd future Hellgate Line signal locations were accessible for photography so I scheduled a NYC day trip to visit those at Mileposts 09 and 11 as well as Amtrak's new LEGGETT interlocking. As a bonus I got some photos of the old Bronx River movable bridge which is adjacent to a new linear park.
As usual the trip started at BWI with ACS-86 #613 ahead of whatever Amtrak Regional had reasonable prices. I then stayed overnight with family in South Jersey to get a jump on the next day's NYC activities.
Since I was unable to secure low cost Amtrak travel to NYC I decided to rely on NJT's RiverLINE making a PATCO connection at the Walter "Ayn" Rand Transportation Center.
There seemed to be a lot of NS road power lined up at Conrail's Pavonia Yard
A CSX road freight was crewed and ready to go with CM44AC #7247 leading.
NJT RiverLINE DMU #3510 at the Trenton buffer stops.
Getting to the southmost platform at the Trenton Amtrak/NJT station, an inbound SEPTA R7 was on the South High track with Silverliner V #809 leading. It departed shortly before my NJT arrived.
In 1997 SEPTA worked with DART First State to extend R2 Regional Rail service from Wilmington to Newark, DE. The project had an additional infrastructure component that constructed a new infill station at Churchman's Crossing and extended the stub end "A" track 2 miles northward from DAVIS interlocking in Newark to the new RUTHBY interlocking near milepost 36.4. Although reasonably accessible, the location is obscure enough to discourage most casual railfans. As a result I undertook a mission to see what RUTHBY was about.
The size and location of RUTHBY interlocking was dictated by the bridge over Old Ogletown Road being only three tracks wide and the existing Milepost 36.2 automatic signal location being just close enough for reuse with the new configuration. The northbound signal structure is modern style tubular aluminum cantilever governing tracks 1 and A. Here we see a southbound Regional train with ACS-86 #654 passing by the RUTHBY location on track #3.
RUTHBY's party piece is an 80mph high speed turnout that was intended to allow SEPTA trains to diverge out of the way of potential Amtrak traffic at near their top service speed. Compared to a more typical 45mph Amtrak turnout this has 3 M3 point machines instead of 2 and an additional 2 M3 machines driving the movable point diamond. Total length of the turnout is 600 feet.
Although the northbound signal is likely the first tubular aluminum signal structure employed by Amtrak on the NY to Washington NEC, it is also one of the last uses of US&S PL-3 position lights before the product was removed from the catalogue in the early 2000's. The 9N signal governing Track A supports the flashing Green | position for the "Cab Speed" cab signal, which in this case would be an 80mph code. The 9N lower head is a single / position for Medium Approach and the lunar white Stop and Proceed marker, which is also seen on the 1N signa.
This photo overlook is located behind a sod and gravel supply outfit. In addition to the Regional I was able to catch both Amtrak Crescents due to the northbound Train 20 running late. Train 19 was behind ACS-86 #658 and Train 2 was behind #605.
One of those services that is easy to overlook is the Metro-North New Canaan Branch which runs between Stamford and the small town of New Canaan. Included in the New Haven's suburban electrification scheme it managed to hold onto its electrification unlike the nearby Danbury Branch. Today the 8-ish mile line is mostly served by shuttle trains making main line connections at Stamford and to use up some Amtrak expiring companion coupons a friend and I made plans to day trip the line from Baltimore taking Amtrak to/from Stamford and connecting to the Metro-North shuttle from there. The following is a summary of how that worked out.
In order to get all the way up to Stamford at a reasonable time we had to catch one of the first northbound Regionals from the BWI airport rail station. Power for that day's trip was ACS-86 #607.
On the trip up I encountered Acela NG power car #2104 at Philly, SEPTA ACS-86 #909 and Amtrak ACS-86 #650 with a southbound Regional near Co-Op city.
Due to the close connection at Stamford I only had had time for this one photo of an inbound Metro-North train to GCT before boarding the New Canaan shuttle.
While the line isn't fast or super exciting, it was interesting to reverse my typical perspective of the Merritt Parkway as well as suburban back yards abutting the single track like it was some sort of suburban trolley.
The line has no passing facilities and typically sees hourly service with the shuttle laying over at Stamford. Today the shuttle was a 6 car train of M8 MU's with a car and a half hanging off the platform at New Canaan.
The balance of the layover is carried out at Stamford so my first act was to briskly walk down to the Grove St crossing to catch the departure. Endcap units were #9445 on the west and #9108 on the east.
My annual winter Boston trip has always involved the challenge of convincing my more normal friends to take a round trip along the full length of the NEC. In the 2010's going overnight on Train 66 was a no-go due to their troubles sleeping on board. For a while a compromise was reached where they would fly up and I would use a companion pass for a return Acela trip. More recently, thanks to Amtrak's new pricing strategy and my tier status perks, we have found ways to make the trip in Acela first class, which my friend finds preferable to flying. Although Boston has a bit of a "been there, done that" feel for me, 2025 would turn out to be the last winter trip to Boston before the Next Gen Acelas entered service. With this I paired a trip to Braintree due to the impending retirement of the early 01500, 01600 and 01700 Red Line stock. You can see both categories of photo here.
Although I live close to the BWI Airport Rail Station, the poor selection of Acela trains often makes it necessary to travel first to DC to then proceed north. While waiting for my southbound MARC train, Amtrak Regional Train 170 pulled into BWI on track #1 with ACS-86 #640.
Arriving Washington Union Station I caught VRE and MARC MP36PH-3C's #V63, #29 and #29 in their respective storage facilities.
The Original Generation Acela sets were getting long in the tooth with train cancellations a frequent occurrence, especially in winter. On my upbound trip I lucked out with my 930am departure departing DC Union Station on time. The Track 19/20 "Acela platform" had two waiting trainsets with power cars #2039 and #2011, with #2039 being the "ultimate" unit of the 40 Acela Express power cars constructed. My party had managed to get window seats at the Row 14/15 4-table, adjacent to the Joe Biden 14A/15A seat pair favored by then Vice President Joe Biden when he was a weekly Acela commuter. While Acela first is a fantastic service, there was still the whiff of Amtrak inconsistency as cut lemons and limes were not stocked for this trip. Fortunately I had remembered to bring my own.
The first arch span of the new PORTAL bridge was in place. The new design is trying hard to make up for replacing an iconic bit of early 20th century engineering, but remains just as soulless just at a higher price point.
At Penn Station we pulled across the platform from NJT ALP-46 #4650.
On the Metro North New Haven Line I managed to snag a photo of New York Central heritage painted P32AC-DM #211.
Passing New Haven, Amtrak Phase III heritage P42DC #145 was still working out of Springfield with ACS-86 #609 on hand for the Regional/Vermonter power changes.
At Boston South Station power car #2035 was on the opposite end of my train and the outdoor train concourse under the new South Station Tower was largely complete.
Delays with the CRRC 01900 series cars have extended the life of the older Boston rolling stock with the bulk of service now being provided by the 01700 and 01800 classes.
The Urban Transportation Development Corporation 01700 series cars, #01754 shown below, are a somewhat updated 1986 copy of the c.1970 01500/01600 series cars built by Pullman Standard. UTDC and its plant in Thunder Bay, Ontario would be taken over by Bombardier Inc who would go on to produce the all-new 01800-series in 1994.
Ages ago when I was going to Boston on a more frequent basis I remember being scared to travel to Braintree because nobody could give me an answer on if the trains would discharge outside of fare control, resulting in paying an exit token followed by two more tokens to get back in. Thanks to the internet I now know the Quincy extension uses island platforms and can be visited without additional cost. Here we see 01754 and 01727 waiting at the Braintree island platform.
A fun feature of the whole 01500/01600/01700 series are the manually operated rollsigns.
Returning back downtown I made an effort to take forward facing video as the new CRRC cars effectively lack a forward view. The Quincy extension was built for 70mph speeds, but is currently operating at 55mph, which is actually an improvement from 40mph due to a track maintenance panic.
Of course my good luck couldn't last forever. Due to about 4 inches of snow falling overnight Sunday my 11am Acela was canceled on Monday and I was pushed back onto the 1pm departure. Arriving at South Station three Acela sets with power cars #2036, #2014 and #2035, were waiting at the buffers, implying that the reason for the cancellation was crew availability as opposed to equipment failure. The roll of the dice directed me onto the #2025/#2039 trainset, aka the exact one I had traveled to Boston on several days earlier. What are the chances?! 藍
Amtrak has been promoting the revamped menu in Acela First and while they have been doing a good job, I was presented with the same menu on both round trips which included an Italian version of the plant based meatballs. While quite tasty Amtrak has been leaning heavily on this ingredient as a vegan dining option and the novelty can quickly wear off. Needless to say I went for the crab enchiladas.
On the New Haven Line I got videos overtaking two separate Metro North trains.
Due to the later departure I was losing light approaching New York, however I managed to get some photos of the sun setting behind Manhattan as we crossed the Hell Gate Bridge.
Ultimate Acela Express power car at New York Penn Station track 12,
That's all for this run up and down the NEC. Join me next time as I head back to the Capitol Region to check out some former New York Central infrastructure.
